Telos Pro [Slimline] Driver Replace
Only replace LED drivers with approved components from Telos or authorised distributors. If you are uncertain please contact Telos directly.
Steps
1. Make sure you have the correct driver and tooling. The driver should be Telos approved and the required tools are 3 & 4mm hex screwdrivers.
2. Start by removing 4 x 3mm hex bolts holding the driver to the driver mounting bracket.
3. Loosen 2 x 4mm hex bolts on the bracket that is nearest the driver. Then slide the bracket over the black connector.
4. Twist the lock ring to the unlocked position and disconnect the electrical connector. Place the old driver to one side.
5. Connect the new driver, you will hear a ‘click’ and the lock ring will show in the locked position. Slide the bracket back to its original position.
6. Place the new driver into position and reinstall the 4 x 3mm mounting bolts.
7. Finally, tighten down the 2 x 4mm bracket securing bolts and check everything is secure by gently trying to move the driver. The replacement is now complete!
Telos Pro v1.1 Driver Replace
Only replace LED drivers with approved components from Telos or authorised distributors. If you are uncertain please contact Telos directly.
Steps
1. Make sure you have the correct driver and tooling. The driver should be Telos approved and the required tools are 3 & 4mm hex screwdrivers.
2. Start by removing 4 x 3mm hex bolts holding the driver to the driver mounting bracket.
3. Loosen 2 x 4mm hex bolts that secure the railing to the main body of the system, then slide the railing over the black connector.
4. Twist the lock ring to the unlocked position and disconnect the electrical connector. Place the old driver to one side.
5. Connect the new driver, you will hear a ‘click’ and the lock ring will show in the locked position. Slide the railing back to its original position.
6. Place the new driver into position and reinstall the 4 x 3mm mounting bolts.
7. Finally, tighten down the 2 x 4mm bracket securing bolts and check everything is secure by gently trying to move the driver. The replacement is now complete!